The VP module amplifies one PPS or 10 MHz signal input to six individual digital pulse outputs. In case of a faulty signal output, a seventh amplifier can be switched to one of the six distributing ports.


    • Six built-in PPS signal amplifiers
    • Monitors all output signals
    • Additional reserve amplifier for fail-safe operation
    LEDs located on the front of the module indicate the operating status. Built-in GPIs can be programmed to signal errors or other warnings. The backlit keys on the front of the module can individually be configured with the included software. The setup (configuration) of the module is made using a PC via the USB or Ethernet port (optionally).

    Connection Plan
    In order to ensure a fail-safe operation, all signals are analyzed and monitored. In the event of an error, the appropriate output is switched to the reserve amplifier. The changeover is programmable as follows:
    • Immediately (automatically)
    • At a specified time (automatically)
    • Manually (by pushing one of the programmable keys)

    Available functions can be selected by configuration over the housing’s USB interface. If a RUB IE Ethernet module is on hand, configuration can also be made via a standard web browser.

    Configuration 1
    Configuration 2

    Status Monitor

    A status monitor can be accessed at any time. SNMP is available in combination with an IE module.

  • Order Code

    Product Model ID: RUB VP
    Module description Distribution module 1:6 PPS signals, TTL level output monitoring and a redundant change-over switcher
    RUBIDIUM series 1 & 3 Distribution Module

Get in Touch


Plura Broadcast, Inc.

HQ Office
Telephone: 602-944-1044
Fax: 602-324-9688
Toll Free: 877-GO-PLURA (467-5872)
Plura Mexico Office


Plura Europe GmbH
Plura MEA
Dubai - United Arab Emirates
Plura ASIA
Seoul - S. Korea

Career Opportunities

Click Here


Click Here