UD126 Series Display.


    • Display color is user selectable Red, Green or Yellow
    • Brightness selector has eight user selectable brightness levels or can be set to adapt automatically
    • Reads LTC, MTD, RS485, RS422, RS232, GPI (UD126L)
    • Reads NTP, PTP and MTDoE (UD126E, ethernet version)
    • Reads IRIG-B (UD126I)
    • Direct GPS antenna input (optional)
    • Automation system interface (optional)
    • Rear sided mode switch (optional)
    • Built-in quartz

    • UD126 is one of the biggest LTC/Ethernet/ IRIG-B display by PLURA.
    • With its digit height of 126 mm, the display can clearly be read even over far distances.
    • The information configuration can be selected via a USB (UD126Ix) or Ethernet (UD126Ex) interface.
    • In combination with a RUBIDIUM Time/Timer/Timecode generator system, the following readouts are available:
      1. Realtime
      2. Timer A-F (incl. differrence times)
      3. Date
      4. Offset times

    • UD126 comprises a six-digit, sevensegment LED display unit.
    • Readouts are visualized in the format hours, minutes, seconds.
    • The display is available in Red, Green and Yellow.
    • A built-in quartz clock enables continuous operation even if a drop out of signal occurs.          

    • A TCU (Timer Control Unit) can directly be connected for a self-contained up/downcounter operation mode.
    • An interface for the direct GPS antenna application is optionally available.

    • There are several included serial protocol decoders available for the input serial data communication. Protocols are selected in the configuration mode of the display. A special PLURA developed MTD protocol mode is also available. MTD is a studiotimer solution developed and designed by PLURA to deliver several information like countdown timers, difference timers, or timezones.
    • There are three general layouts selectable per display: LTC reading, Ethernet reading and IRIG-B input capabilities.
    • LTC reading (UDxxL) 


    • LTC reading UD-displays are equipped with an LTC input, a  RS485 interface, a selectable RS422/232 interface and four GPI inputs (e.g. for a timer control keypad).


    • Ethernet reading (UDxxE)   


    • Ethernet reading UD displays are equipped with an RJ45 port. Supported protocols are NTP and MTDoE (MTD timer distribution over  LAN/WAN; please see our separate leaflet for further information).  Different time servers can be addressed, in order to “bridge” a signal  that may be lost. SNMP monitoring is optionally available. 


    • IRIG-B reading (UDxxI)                        
    • IRIG-B reading UD-displays are equipped with an IRIG-B input and a selectable RS422/232 interface.
    • Configuration            
    • All display configurations is done via the USB interface  or via a standard internet browser (Ethernet displays only). Software updates is via the standard USB interface.  


  • Order Code

    Product Model ID: UD126R
    Product description: MTD display 126mm, LTC/ethernet/IRIG-B interface, 6 digits, red LEDs, AC powered
    Time & Time Code Displays Stand Alone Unit


    Product Model ID: UD126G
    Product description: MTD display 126mm, LTC/ethernet/IRIG-B interface, 6 digits, green LEDs, AC powered
    Time & Time Code Displays Stand Alone Unit


    Product Model ID: UD126Y
    Product description: MTD display 126mm, LTC/ethernet/IRIG-B interface, 6 digits, yellow LEDs, AC powered
    Time & Time Code Displays Stand Alone Unit

    Options for UD126

    UD-G GPS-Interface for UD Series display
    UD-S Mode switch (rear sided button)
    UD-AI Automation-Interface



Get in Touch


Plura Broadcast, Inc.

HQ Office
Telephone: 602-944-1044
Fax: 602-324-9688
Toll Free: 877-GO-PLURA (467-5872)
Plura Mexico Office


Plura Europe GmbH
Plura MEA
Dubai - United Arab Emirates
Plura ASIA
Seoul - S. Korea

Career Opportunities

Click Here


Click Here