UD 300 Series Display.


    • Display color is user selectable Red, Green or Yellow
    • Brightness selector has eight user selectable brightness levels or can be set to adapt automatically
    • Reads LTC, MTD, RS485, RS422, RS232, GPI
    • Reads NTP, PTP and MTDoE
    • Reads IRIG-B
    • Direct GPS antenna input (optional)
    • Automation system interface (optional)
    • Rear sided mode switch (optional)
    • Built-in quartz
    • The UD series includes various time and date displays. The UD can display Time Code, local time, a different time zone or a stopwatch timer.
    • A built-in quartz clock enables continuous operation even if a drop out of signal occurs.
    • All displays of the type UD300 show hours, minutes and seconds, in a six-digit format.
    • The digit height is 56 mm.  
    • Diameter of the faceplate is 300 mm.
    • A rotating LED seconds ring with 60 individual dots encircles the digital display.


    • Three LEDs selectable colors (red, green, yellow) feature and an adjustable brightness selector. The brightness can be adjusted manually or can set to an automatic mode, where a photo sensor automatically adjusts the brightness depending on the current level of environmental light.       


    • Various universal interfaces are included, which enable a wide assortment of data or Time Codes to be displayed.
    • There are several included serial protocol decoders available for the input serial data communication. Protocols are selected in the configuration mode of the display. A special PLURA developed MTD protocol mode is also available. MTD is a studiotimer solution developed and designed by PLURA to deliver several information like countdown timers, difference timers, or timezones.
    • All UD displays come standard with LTC, Ethernet and IRIG-B input capabilities.


    • LTC Input  


    • UD-displays are equipped with an LTC input, a  RS485 interface, a selectable RS422/232 interface and four GPI inputs (e.g. for a timer control keypad).



    • Ethernet Input    


    • UD displays are equipped with an RJ45 port. Supported protocols are NTP and MTDoE (MTD timer distribution over  LAN/WAN; please see our separate leaflet for further information).  Different time servers can be addressed, in order to “bridge” a signal  that may be lost. SNMP monitoring is optionally available. 


    • IRIG-B Input        


    • UD-displays are equipped with an IRIG-B input and a selectable RS422/232 interface.


    • Configuration            
    • All display configurations is done via the USB interface  or via a standard internet browser. Software updates is via the standard USB interface.   


  • Order Code

    Product Model ID: UD300
    Product description: MTD display with LED seconds ring, LTC/ethernet/IRIG-B interface, 300 mm square, AC powered
    Time & Time Code Displays Stand Alone Unit


    Options for UD300

    UD-PoE3Power over ethernet for UD300 and UD300D (instead of built-in AC power)UD-GGPS-Interface for UD Series displayUD-AIAutomation-Interface
    UD300D UD300 with appended 25 mm display, 6 digits
    PI Ethernet power injector
    UD-S Mode switch (rear sided button)
    UD-300-W Mount kit for up to 2 x UD300 (wall/ceiling)

Get in Touch


Plura Broadcast, Inc.

HQ Office
Telephone: 602-944-1044
Fax: 602-324-9688
Toll Free: 877-GO-PLURA (467-5872)
Plura Mexico Office


Plura Europe GmbH
Plura MEA
Dubai - United Arab Emirates
Plura ASIA
Seoul - S. Korea

Career Opportunities

Click Here


Click Here